The Oil Cooler, Reinvented

CSF’s RACE-SPEC Oil Coolers – Available in six universal-fit sizes

Oil Cooler Model Jump Links

CSF is proud to introduce its new line of universal-style high-performance oil coolers. Currently consisting of four unique sizes, CSF has “reinvented” a common yet critical item, with features and benefits never seen before on an aftermarket high-performance oil cooler!

CSF Universal Oil Coolers (CSF #8201, #8202, #8066, #8110, #8111, #8119)

Below are the features of the oil cooler line, details of each oil cooler, and some examples of the many ways these oil coolers can be utilized; engine oil cooling, transmission oil cooling, power-steering, differential-cooling, as well as a water heat exchanger.

CSF #8201 / CSF #8202

The latest additions to CSF’s Universal Oil Cooler lineup (Check out the official release here) – featuring custom end tanks with a 45° front angle and fittings pointed straight back, allowing them to fit flush inside ’73-style Porsche RS/RSR bumpers. Used as a universal-fit cooler, these new oil coolers can be mounted horizontally, vertically, as well as parallel to the ground (provided that the oil cooler has proper air-flow). The longer/shorter rectangular sizing allows the oil coolers to be placed in spaces that don’t have much vertical surface area as well as promotes better airflow to the other components in the cooling system.

CSF #8201 / 8202 Details & Highlights

The “BOSS” Cooler – CSF #8066

CSF’s 1st universal-style oil cooler, dubbed the “BOSS” Cooler, has been on the market since 2016. (Check out the official press release here) Since CSF concentrates mostly on direct fit applications, this oil cooler may still be unknown to many. However, for many industry insiders and race-teams that are close to CSF, this oil cooler has been the go-to option in so many unique ways.

Originally conceived as a new twist on the Mazda FC Rx-7 oil cooler which was used as a Japanese bosozoku style externally mounted oil cooler. See more information here. Check out Japanese Nostalgic Car’s write up on the “Boss Cooler” and how it fits well with Shakotan builds as well.

CSF #8066 Details & Highlights

Creators of the modern Rocket Bunny S13 “BOSS” wide-body conversion kit wanted a modern take on the oil cooler to match. CSF was called to make this oil cooler happen!

Once racers found out about this uniquely sized oil cooler, they started to use it in numerous ways, such as BMW specialist, R&D support, and race partner, TySpeed who has used the CSF BOSS oil cooler in a v-mount configuration to keep his pro-competition level M2 out of limp mode on the race track.

Shawn Basset @ShawnB26 also utilizes the “BOSS” cooler along with the CSF R1 Competition Radiator for his competitive racing Datsun 240z built for the track and Colorado’s Pikes Peak Hill Climb. You can see more details of this garage built monster in the CSF Blogs or follow his continued build journey on AttackingtheClock.com.

CSF #8066 Oil Cooler Kits

GMS Camaro ZL1 STAGE.I Oil Cooler + Impact Frame Package

Griffin Motorsports (GMS) specializes in LT4 and Camaro ZL1 performance parts. They design, engineer, and even manufacture a wide variety of upgrades that have an industry leading reputation. GMS offers the largest oil cooler upgrade for the ZL1 featuring the CSF #8066.

CSF #8110 / CSF #8111

These two new oil coolers are professional-level high-performance universal oil coolers. From the beginning of development, these coolers were specifically designed for direct-fitment as a front mount center oil cooler for Porsche 911/930 models (up to 1989) (for IROC-style or similar front bumper).

CSF #8110 / 8111 Details & Highlights

CSF's RS style Oil Cooler in a Porsche IROC style front bumper

CSF’s new oil cooler (CSF #8110) compared to an original Porsche RSR oil cooler. The OEM Porsche oil cooler is now more than 30 years old, and is very hard to find. Often used RSR oil coolers go for $3,000 USD in the resale market. CSF has filled the void for consumers looking for an affordable alternative with new technology and better fitment than the original. CSF's well thought out design featuring a tapered tank with 15 degree inlet/outlet angle is a huge improvement over the bulkier banjo style fittings of 30+ years ago.

Ryan Hoegner’s Porsche 911 SC also features the new Universal Dual-Pass Oil Cooler (CSF #8110). This is an example of the direct fitment for the Porsche 911 center front oil cooler (RS Style). The oil cooler really completes the look of the front bumper. Check out Speedhunters’ feature on the road to SEMA.

The Kraftwerx Auto R32 swapped MKll Volkswagen GTI Rallye is a true work of art. This build features a unique combination of CSF cooling products, a one-off liquid-to-air intercooler made by Sheepey Race using CSF liquid-to-air intercooler cores, a Universal Tuck Radiator (CSF #8049) made exclusively for Rywire and a Universal Oil Cooler (CSF #8110) as a heat exchanger. Read in-depth details on the build in Performance VW as it sits deservingly on the cover of January’s 2019 edition. Also, check out SPEEDHUNTERS’ coverage of its SEMA 2018 debut.

CSF’S #8110 dual-pass oil cooler (RS style) packaged into the tight confines of a custom engine build. Line routing is now much easier with both feed/return connections on side compared to a typical oil cooler where the inlet/outlet are often on opposite ends.

CSF #8110/8111 Oil Cooler Kits

CARGRAPHIC RSR style centre-mounted oil cooler kit - R1120020700

Designed specifically for the early Porsche 911 model 3.2l Carrera, this high performance oil cooler reduces oil temperature by up to 20 degrees, extending engine life and optimising performance. With its 10 rows and dimensions of 610x146x57mm, it offers maximum cooling capacity.

Whether you're on the track or over a mountain pass, the CARGRAPHIC oil cooler kit lets you get the most out of your Porsche.

CSF #8119

The most compact sized oil cooler from the CSF range, this oil cooler can be mounted and used in many different configurations.

The CSF #8119 is used as the engine oil cooler for the CSF EVO X. Mounted underneath the right headlight, the oil cooler design allows endless mounting configurations in ways most conventional oil coolers cannot. Also, the durability of the bar/plate core enables it to be installed in areas where a large amount of debris would typically be a problem for fear of puncture and failure.

CSF #8119 Details & Highlights

Upgrade for the Porsche 993 Turbo/S & GT2 Front Oil Cooler

The CSF #8119 can also be used as an upgrade/OEM+ Upgrade for the Porsche 933 Turbo/S & GT2 Oil Cooler. The CSF Cooler is larger, more robust, and about 1/4 the cost of a new OE unit (993 207 235 08) from Porsche.

964 & 993 Additional Front Oil Cooler

The CSF #8119 can also be used as an additional oil cooler on the 964. This is a perfect OEM+ Oil Cooler Upgrade for the Porsche 964. CARGRAPHIC developed a bolt-on plug and play 964 Carrera 2 / 4 / RS Oil Cooler Kit that is designed to run in series with the OE cooler.

CSF #8119 Oil Cooler Kits

Euro Parts West Kit

Buy from Euro Parts West

993 216 8119 81 EPW - Auxiliary Engine Oil Cooler Retrofit Kit: Fits 1989-1998 Porsche 964 / 993 / Turbo S / GT2 / RS (Front Left Center Mount - For use with or without AC)

Retrofit Set Includes:
(1) 993 207 238 80 EPW : Engine Oil Cooler (CSF #8119) Turbo S Retrofit Reproduction - 64% Greater Core Surface Area compared to the original Porsche cooler (993 207 238 80)
(1) 993 207 340 16 EPW : Engine Oil Cooler Hose Line Set (Feed / Return / Metric Line Adapter Hardware / -16AN Lightweight Hose / Fittings)
(1) Mounting Set M8 Hardware for simple suspension under impact bumper.

Note: Original Air Duct Cover for Engine Oil Cooler requires trimming modification or new air duct cover PN: 964 575 522 02.

CARGRAPHIC Kit

CARGRAPHIC additional oil cooler kit for models with-/without air conditioning - R6420020700

Kit Includes:

• Alloy CSF High Performance oil cooler radiator 8 rows 330 x 121 x 57mm
• Connectors M30 x 1.5mm, internal diameter 19mm, stainless steel
• 2 x COHLINE DN20 oil pressure hoses: Internal diameter 19mm
• 180° stainless steel connecting tube M30 x 1.5mm, internal diameter 19mm, to right OE / Factory oil cooler in front right wheel arch
• Mounting Kit

529 Innovations E888 Oil Cooler - Varient 2

529 Innovations teamed up with iABED Industries and CSF to make their Oil Cooler Kits for use on A3/S3, TT/TT-S, Golf/GTI, and Jetta with the EA888.3 & EA888.4 engines These kits have been track tested and proven to lower both Engine and Oil temperatures.

This kit provides a fully divorced, thermostatically controlled oil cooling system so that both engine and oil temps can be regulated independently.

The 3 distinct advantages of a CSF Oil Cooler

The unique design of CSF’s oil cooler line has 3 very distinct advantages over convention style oil coolers (similar to Setrab, Mocal, or lesser quality “plate-type/stacked” oil coolers).

1. It allows the oil cooler to now be placed in tighter spaces or different areas of the vehicle that don’t have much vertical surface area. The CSF oil cooler w/ it’s longer rectangular size can also help with avoiding the stacking of too many coolers which may cause airflow issues to other components in the cooling system.
2. Inlet/outlet port placement is much easier to route oil lines. In a typical oil cooler lines have to be routed from different / opposite ends of the cooler often facing up or down. Usually one line has to run across from one side of the cooler to the other to then be routed together to the feed/return connection of the oil system.
3. The CSF oil cooler is much more robust, durable, and can withstand a higher peak burst rate. This allows the cooler to be mounted in areas that might get high debris (front fascia, diff cooler, side vents, etc…). When using a conventional oil cooler, the type of mounting locations are often not considered due to the risk of damage. The CSF oil cooler is designed to withstand a tremendous amount of vibration and debris (you can even stand on it!).